120o Pressure Screens
Designed for efficiency and simplicity

Fluid-Quip has redesigned the pressure screens used for liquid-solid separation of fibrous non-abrasive materials with efficiency and simplicity in mind. The following is a list of unique standard features:

Features:

  • Easy access through large front and back doors
  • Easy, Quick-change, vapor proof EPDM rubber door seals
  • Quick screen change-out
  • Simple rugged one handle door latch
  • 316 stainless steel screen with UHMW side supports
  • UHMW feed nozzles, replaceable from outside

Operation

Slurry is pumped into the header manifold @ 40 psig, and is directed to the 120o screen at a tangent through the feed nozzles. As the slurry flows down the screen, thin layers are sliced off by the screen bar edges and pass through the slot opening to the filtrate port. Material in the slurry that is larger than the slot opening will be retained on the screen surface and move downward to the "oversize" port.

Replacement screen surfaces

  • available for other nozzle fed units
  • Precision welded or looped wedge wire
  • 316L stainless steel
  • polished finish
  • Four screen opening; 50,75,100, and 150 micron

Options

  • Straight-in (front mount) or "U" shaped (top mount) feed design
  • 1/2", 3/4" or 1" (13mm, 19mm or 25mm) diameter feed nozzles
  • 50, 75, 100, or 150 micron screen elements
  • 304 or 316L stainless steel construction
  • Flanged connections
pressurescreen-1.gif - 77107 Bytes pressurescreen-2.gif - 134459 Bytes

pressurescreen3.gif - 29971 Bytes
Swing up nozzles allow for ease in screen removal
pressurescreen-nozzle.gif - 55515 Bytes
Slide-in nozzles for ease of installation
CLICK HERE for more details